TY  - EJOU
AU  - 
T1  - Synthesis of Biodiesel from Tropical Almond  (Terminalia Catappa) Seed Oil
T2  - Current Research in Agricultural Sciences

PY  - 2016
VL  - 3
IS  - 4
SN  - 2312-6418

AB  - The objective of this study is extraction and characterization of oil from tropical almond seed, trans-esterification and characterization of tropical almond seed oil biodiesel. All experiments were replicated and average results were evaluated. The moisture content of the seed was 2.04 %; the oil was extracted using solvent method and the percentage of oil yield was 50.33 %. The physicochemical properties of the oil obtained during the experiment were; density (0.90 g/cm3), specific gravity (0.89), kinematic viscosity at 40 oC (14.1 mPa.s), cloud point (16.0 oC), pour point (11.5 oC), smoke point (173.0 oC), flash point (208.0 oC), fire point (271.0 oC), saponification value (199.19 mgKOH/g), acid value (3.37mgKOH/g), FFA (1.68 mgKOH/g), Peroxide value (5.0 meq/kg), and Iodine value (98.0 gI2/100g). The oil was trans-esterified to biodiesel using oil to alcohol ratio of 4:1 and KOH as catalyst. The percentage of biodiesel yield was 75.0 % averagely. The physicochemical properties of the biodiesel obtained during the experiment were; density (0.96g/cm3), specific gravity (0.90), kinematic viscosity at 40 oC (5.20 mPa.s), kinematic viscosity at 100 oC (4.30 mPa.s) cloud point (7.0 oC), pour point (6.0 oC), smoke point (161.0 oC), flash point (186.0 oC), fire point (216.0 oC), saponification value (182.4 mgKOH/g), acid value (0.84 mgKOH/g), FFA (0.42 mgKOH/g), Peroxide value (8.0 meq/kg), and Iodine value (109.0 gI2/100g, the calculated cetane number was 51.70. The result obtained for the physicochemical properties of the biodiesel were compared with the ASTM standard and it was concluded that tropical almond seed oil is a good feedstock for biodiesel production since the result is within ASTM specification standard.
KW  - Almond seed
KW  - Biodiesel
KW  - Physicochemical properties
KW  - Cetane number
KW  - Pour point
KW  - Oil yield
KW  - Iodine value
KW  - ASTM specification standard.
DO  - 10.18488/journal.68/2016.3.4/68.4.57.63